Concrete resurfacing is an excellent way to restore old, worn-out surfaces without the need for complete replacement. However, if not done correctly, it can lead to costly repairs and poor results. At The Platinum Coatings, we specialize in concrete repair and resurfacing, ensuring a flawless finish every time. Here are eight common mistakes to avoid when resurfacing concrete.

1. Skipping Proper Surface Preparation

One of the biggest mistakes in concrete resurfacing is failing to prepare the surface properly. Dirt, oil, grease, and old coatings can prevent the new overlay from bonding correctly. Before applying the resurfacer, thoroughly clean the surface and remove any loose debris.

2. Ignoring Cracks and Damage

If your concrete has cracks or holes, they must be repaired before resurfacing. Many people overlook this step, leading to premature failure of the resurfacing layer. Use a high-quality crack filler to ensure a smooth and long-lasting finish.

3. Applying the Resurfacer on a Wet Surface

Moisture can weaken the bond between the existing concrete and the new resurfacing layer. Always ensure the surface is damp but not excessively wet before application. A slightly moist surface helps with proper adhesion.

4. Using the Wrong Resurfacing Product

Not all resurfacing products are the same. Choosing the wrong type for your specific needs—whether for driveways, patios, or indoor floors—can result in a poor finish and reduced durability. At The Platinum Coatings, we use industry-leading concrete repair and resurfacing materials tailored to each project.

5. Applying the Material Too Thick or Too Thin

Thickness matters when resurfacing concrete. Applying the overlay too thick can cause cracking, while an overly thin layer may not provide the durability you need. Follow the manufacturer’s recommendations for the best results.

6. Rushing the Drying Process

Some people try to speed up the drying process by using heat or fans, but this can lead to surface imperfections. Allow the resurfaced concrete to cure naturally to prevent cracks and weak spots.

7. Skipping the Sealing Step

A high-quality sealer protects the resurfaced concrete from moisture, stains, and wear. Many people skip this step, leading to premature damage. Sealing extends the life of your resurfaced concrete and enhances its appearance.

8. DIY Without Proper Expertise

While DIY concrete resurfacing may seem cost-effective, it often leads to errors that require expensive fixes. Hiring professionals like The Platinum Coatings ensures a smooth, durable, and long-lasting finish.

Conclusion

Avoiding these common mistakes will help you achieve a flawless, durable concrete surface. If you're considering concrete repair and resurfacing, trust The Platinum Coatings for expert solutions that deliver top-quality results. Contact us today for a consultation!